What tethering software do you use?
Summary: Adrian Stewart shares their experience with NX Tether software for Nikon cameras, encountering frequent disconnections and corrupted images. Fellow users, including Anthony Iavarone (Captura), Felecia McGowian (Captura), and Mark Quintilio (Captura), suggest trying alternative software like Digicam Control and checking technical aspects such as USB connections and power settings. Ashlynn Chaves discusses their transition to Sony cameras and the tethering challenges they faced with both Nikon and Sony models. Meanwhile, Becca Boone recommends Evoto for its speed and reliability with Nikon cameras.
We shoot tethered with Nikon camera. In years past we used the software "Control My Nikon" to send images from camera to the Hotfolder. We switched from that a year or so ago due to white balance/coloring issues we couldn't solve. The software we use now is "NX Tether" by Nikon. This works great except when it unexpectedly just shuts down or disconnects from the camera. I haven't been able to figure out why this happens. I cannot detect a pattern to when this happens. Sometimes it works great for a whole shoot....and sometimes it will shut down multiple times during a shoot. When it shuts down and is then restarted it adds corrupted images to Workflow which have to be removed or Workflow will not sync.
Has anyone else encountered this with NX Tether? Does anyone else use Nikon? If so, what software do you use?
Becca Boone
We switched over to Evoto for tethered shooting recently since we're doing most of our edits in Evoto anyway. We've never had any issues and have found that it's a lot faster than other software. Goes right into our hot folder and works flawlessly. Something to check out if you haven't already! ETA: We are also Nikon shooters. We use Tether Tools orange tether cables.
Ashlynn Chaves
We used to have Nikons and used Control My Nikon, but would semi-frequently have issues with it disconnecting from Workflow (WF) randomly and then not syncing all the images, etc.
We switched to Sony cameras this school year and we are using Sony Imaging Edge Desktop for tethering. I don't think we have had many issues with it, although one downside we have experienced is we can no longer filter by camera. The Nikons used to show up separately in WF with the serial/ID numbers, but all of our Sonys just show up as ILCE-6700. We used to filter by camera to export group photos easier and identify set up issues more easily, but unfortunately we can no longer do that as it displays as if there's one single camera. Not sure if it's something on our end or just how the tethering app is connecting to WF? Any insight from Sony users is appreciated!
Adrian Stewart
OP@Mark Quintilio thanks for that tip. We do typically shoot in Live view mode so I will make some changes and see how that goes.
@Felecia McGowian (Captura) & @Anthony Iavarone (Captura) Thanks for the recommendation of Digicamcontrol. I am testing that program now and will see if I like it better than NX tether. Always appreciate advice from some true veterans of the software.
Cheers and have a great weekend!
Mark Quintilio (Captura)
Hey @Adrian Stewart
Not sure if this is the issue, but I remember we had some Canon cameras that when we used the live view while photographing, teh camera saw itself as though it was in video mode, even though it was not. The Canon system had a finite time limit for videos and that was causing the camera to disconnect. Is that a possibility? I would test the Nikons in live view and shooting traditionally to see if the connection keeps dropping.
I shoot Nikon as well and only through the view finder. The few jobs I have photographed this year have not dropped the camera at all using the NX Tether.
Hope that helps!
Felecia McGowian (Captura)
Hey!
I haven’t personally seen or experienced this issue with NX Tether, but I can definitely share a few things that might be worth checking:
USB cable & connection – Make sure you’re using a high-quality cable and, if possible, plug directly into the computer (avoid hubs)
Power settings – Check that your computer isn’t putting USB ports to sleep (Device Manager → USB settings)
Camera settings – Turn off any auto power-off or sleep settings on the camera
Software version – Make sure NX Tether is fully up to date
Computer performance – Close any unnecessary programs that could be competing for resources
Hotfolder cleanup – If NX Tether crashes mid-transfer, it can leave behind incomplete/corrupt files—removing those before syncing is key
Also, I do shoot Nikon as well, but I personally use DigicamControl and have had pretty stable results with it—might be worth testing as an alternative.
Hope that helps a bit! Let me know if you end up finding a pattern.
Anthony Iavarone (Captura)
Hey Adrian. Try digicam control https://digicamcontrol.com/. It’s one of the best free programs available